STORAGE 3-6TL M

Hybrid inverter totally equipped

This hybrid inverter (solar + batteries) is a single-phase device that allows a bidirectional flow of energy between the batteries and the loads. This inverter is suitable for both grid-connected and off-grid systems, as it can generate an AC grid, acting as grid manager and achieving a balance between generation, storage and consumption. It also has back-up functionality for self-consumption systems, generating the grid to feed the loads in case of a grid outage.

Integrated PV inputs

These battery inverters integrate two PV inputs in order to offer greater functionalities. These PV inputs reduce the cost of the installation, allowing to have a battery inverter and a PV inverter in a single equipment.

EMS Inside

The inverter is equipped as standard with an EMS (Energy Management System) that permits more advanced functionalities, as self-consumption strategies. Thanks to the built-in EMS, the installation can be monitored at all times via a PC or mobile phone with the free INGECON SUN Monitor application, available at Play Store and App Store.

Download now from our training website the instructions for configuration and commissioning, detailed wiring diagrams and further information about the operation modes:

www.ingeconsuntraining.com

• Two solar PV MPPT inputs.
• Output power: 3, 4.5 or 6 kW.
• Compatible with LV and HV batteries.
• Up to 13.5A of maximum input PV current along all the MPPT voltage range.
• Energy management system (EMS) inside.
• Suitable for on-grid and off-grid systems.
• Wi-Fi and Ethernet communications.
• RS-485 communication for the wattmeter.
• CAN Bus 2.0 communication for the batteries' BMS (battery management system).
• Two configurable digital inputs.
• Two configurable potential-free outputs.
• Ease of maintenance.
• Suitable for indoor and outdoor installation (IP65).
• Free software INGECON SUN Monitor for system monitoring.
• Fast and easy commissioning thanks to the INGECON SUN Monitor app.
• It can operate as a pure solar inverter, allowing to add the batteries at a later stage.
• Peak shaving functionality.
• Modbus TCP / Wi-Fi communication with single-phase EV chargers.
• Configuration of the battery charge / discharge times.

For any incident involving equipment from the INGECON® SUN product range, you can contact our Technical Support Service, through the following email: sat.solar.energy@ingeteam.com.

Standard accessories

• DC breaker for the solar PV array.
• Pre-charging system at the battery input.
• AC overvoltage protection.
• Insulation faults.
• Short-circuits and overloads at the output.
• Anti-islanding with automatic disconnection.
• 2 digital inputs.
• 2 potential free outputs.
• Relay for the neutral to earth connection for critical loads in TT systems.