X SERIES UL (375-1070 kVA)

The X Series UL version has been especially designed for the North American market (UL1741 certified). These PV inverters are equipped with two to four electronic blocks connected in parallel to the same PV generator and to the same MV transformer.

Thanks to an advanced control algorithm they can guarantee the maximum efficiency through the selective operation of their power blocks based on the PV power available. Furthermore, they achieve up to 98.6% maximum efficiency levels, and they can provide their rated power up to 122ºF (50ºC) ambient temperature.

This X Series of the INGECON SUN PowerMax UL family can deliver reactive power and control the active power delivered to the grid. Moreover, it features a NEMA 3R protection rating that enables it to be installed outdoors.

• Grid support: these PV inverters feature a low voltage ride-through capability. They can deliver reactive power and control the active power delivered to the grid.
• Maximum efficiency values of up to 98.6%.
• The rated power is delivered up to 122ºF (50ºC).
• Advanced MPPT algorithm that makes it possible to harness the maximum power from the PV array.
• Standard 5 year warranty, extendable for up to 20 years.
• Ease of maintenance thanks to its modularity. If a power block fails, the power is then distributed amongst the remaining blocks.
• RS-485 communications supplied as standard.
• DC and AC lines integrated into the same cabinet to facilitate repair work.
• Software INGECON SUN Manager for PV plant access and data registration.
• Software INGECON SUN Monitor for PV plant monitoring.

Integrated accessories

• RS-485 communications.
• Motorized DC switch for the automatic disconnection of the inverter from the PV array.
• Protection against reverse polarity.
• Protection against insulation failure.
• AC fuses.
• DC and AC surge arresters (type 2).
• Four DC fuse-holders per power block. Non-grounded inverters have both poles protected.
• Anti-islanding with automatic disconnection.

Optional accessories

• Inter-inverter communication via Ethernet or Bluetooth.
• Remote communication via GSM / GPRS.
• DC fuses.
• Monitoring of the DC currents.
• Wattmeter on the AC side.
• Auxiliary services kit.
• Heating kit for operating at an ambient temperature of -22ºF (-30ºC).