• Electric motors

    Electric motors

Electric Motors > Marine Electric Motors

Marine Electric Motors

At INDAR, quality is non-negotiable. To ensure this, we are equipped with the most advanced testing technology in the sector, including the following installations:

  • A rotary electrical machine and power converter laboratory. This innovative laboratory together with our highly-qualified R+D+i department, enables us to develop new products using in-house technology and to flexibly adapt to the needs of our clients.
  • Six test benches for series and type tests performed on all of the machines in our standard range. All information generated during the tests is centralised and managed by an IT system which collects the parameters studied during the tests so that real instant readings can be obtained on the functioning of the machines. This makes it possible to gain a detailed understanding of the machine and its behaviour in all conditions, previously established depending on the working specifications and conditions required by the client.

The results obtained during tests are the basis for a process of optimisation, validation and adaptation of INDAR products to different applications and working conditions.

The main characteristics of our test benches are as follows: 

R+D+i laboratory
200m2 installation raised on a floor with a seismic mass of 1600 t.
Total lifting capacity (by cranes) of up  to 126 t.
Tests at full load up to 8 MW
Back to back configuration up to 65 MW
Testing capacity in LVRT (Low Voltage Ride Through)
Thermal insulation and electrical combined tests
Auto-generated mains of 50/60 Hz to 20 MVA
Climatic chamber (-30ºC to 80ºC) for extreme environmental conditions
Motor test benches
Surface motors and horizontal and vertical generators
200 m2 installation
Total lifting capacity (by cranes) of up  to 80 t.
Testing capacity up to a voltage limit of: 15 kV s/IEC 64034-29
Testing capacity up to a current limit of: 5000 A s/IEC 64034-29
Testing capacity up to a speed of 3600 rpm
Submersible motors (IP68)
Barrel with110 m3 capacity for submersible motor tests
Total lifting capacity (by cranes) of up to 63x2 t.
Testing capacity up to a voltage limit of: 6 kV s/IEC 64034-29
Testing capacity up to a current limit of: 5000 A s/IEC 64034-29

View
Download

Information INDAR Marine

View
Download

Offshore Support

View
Download

Research Vessels

View
Download

Case Study_Oleg Strashnov

View
Download

Case Study_Joseph Plateau

View
Download

Case Study_Cristobal Colón & Leiv Eiriksson

View
Download

Case Study_Expedition Cruise Vessels

View
Download

Case Study_Lionheart

  • 18/11/2024

    Hydropower & Dams

    The conference aims to bring together around 1200 international delegates from at least 75 countries, to discuss all topical aspects of hydropower, da...

View all

View all

Do you need more info?

I agree to receive commercial communications from Ingeteam
I have read and I agree to Ingeteam´s privacy terms.
* You have to accept the Ingeteam´s privacy terms.

Our technical and sales team will be glad to answer all your enquiries. We kindly ask you either to keep in touch with us through our contact data or to fill the enclosed form. We will reply you at the shortest notice.

Thanks in advance for your interest.
Send